Filter
Top Products
49
Shooting in Smile Mode
Automatic Shooting of Smiling Faces
Notes on Blink Proof
The blink proof function can be used in smile mode.
The camera takes two pictures and chooses an image in
which the subjects’ eyes are open.
• The message on the right will be displayed for a few
seconds when the camera detects someone blinking
in the picture taken.
• To turn blink proof on or off, press the d button in
smile mode to display the smile mode menu and choose Blink proof to change
the setting.
• The setting for blink proof can be previewed in the monitor (A6).
C Operation of the Shutter-Release Button
Pictures can also be taken by pressing the shutter-release button.
• When a face is detected, the focus is locked to the detected face and the shutter is released.
• If no face is detected, the camera focuses on the subject in center of frame.
C Functions Available in Smile Mode
• Flash mode is disabled when Blink proof is set to On. Flash mode (A30) will be changed to U
(auto) when Blink proof is set to Off (other settings can be selected).
• Exposure compensation (A34) settings can be changed.
• Digital zoom is not available.
• Press the d button to display the menu for smile mode and change the settings for Image
mode (A90). Changes made to the image mode setting apply to all shooting modes (except
those available from the movie mode).
C Auto Off while in Smile Mode (Standby Mode)
The auto off function (A122) will be activated and the camera will turn off if no operations are
performed in any of the following situations in smile mode.
• The camera is unable to detect any face.
• The camera has detected one or more faces, but is unable to detect a smiling face.
D More Information
See “Autofocus” (A27) for more information.
One or more subjects may have
closed their eyes.