Filter
Top Products
117
Basic Camera Setup: The Setup Menu
Shooting, Playback and Setup Menus
3 Press K.
• The time zone selection screen is displayed.
4 Press J or K to choose the travel destination
region (time zone).
• If the daylight saving time is in effect, press H to turn
on the daylight saving time option. When the option is
enabled, W is displayed at the top of the monitor, and
the time is advanced one hour. To turn off the daylight
saving time option, press I.
• Press the k button to choose the travel destination time zone.
• While the travel destination time zone is selected, the Z icon will be displayed in the
monitor when the camera is in shooting mode.
B The Clock Battery
The camera’s internal clock uses a backup battery that is independent from the camera’s battery. The
clock battery charges when the main battery is installed or an AC adapter is connected, and can
provide several days of backup power after about ten hours of charging.
C w (Home Time Zone)
• To switch to the home time zone, choose w Home time zone in step 2 and press the k button.
• To change the home time zone, choose w Home time zone in step 2 and perform steps 3 and 4,
to set the home time zone.
C Daylight Saving Time
When daylight saving time starts or ends, turn the daylight saving time option on or off from the
time zone selection screen displayed in step 4.
D Imprinting the Date on Pictures
After setting the date and time, set the Date imprint setting in the setup menu (A120). Once
Date imprint is set, the shooting date and time can be imprinted on the image data when taking
pictures.
15:30
Time zone
Home time zone
Travel destination
15/11/2009
Exit
London, Casablanca
11:30
EDT:
New York
Toronto
Lima
Back
-
04:00