North Star S510 Digital Camera User Manual


 
19
Inserting Memory Cards
First Steps
Removing Memory Cards
Before removing memory cards, turn the camera off
and confirm that the power-on lamp is off. Open the
battery-chamber/memory card slot cover and press the
card in 1 to partially eject the card 2. The card can
then be removed by hand.
B Formatting Memory Cards
If the message at right is displayed, the memory card must be
formatted before use (A110). Note that formatting permanently
deletes all pictures and other data on the memory card. Be sure
to make copies of any pictures you wish to keep before formatting
the memory card.
Use the rotary multi selector to choose [Yes] and press k. The
confirmation dialog will be displayed. To start formatting, choose
[Format] and press k.
Do not turn the camera off or open the battery-chamber/memory card slot cover until
formatting is complete.
The first time you insert the memory cards used in other devices into the COOLPIX S510, be sure to
format them using this camera (A110).
B The Write Protect Switch
SD memory cards are equipped with a write protect switch.
Pictures cannot be recorded or deleted and the memory card
cannot be formatted when this switch is in the “lock” position.
Unlock by sliding the switch to the “write” position.
B Memory Cards
Use only Secure Digital memory cards.
Do not perform the following during formatting, while data
is being written to or deleted from the memory card, or during data transfer to a computer. Failure
to observe this precaution could result in the loss of data or in damage to the camera or memory
card:
- Take out the battery or memory card
-Turn off the camera
- Disconnect the AC adapter
Do not format the memory card using a computer.
Do not disassemble or modify.
Do not drop, bend, or expose to water or strong physical shocks.
Do not touch the metal terminals with your fingers or metal objects.
Do not affix labels or stickers to the memory card.
Do not leave in direct sunlight, closed vehicles or areas exposed to high temperatures.
Do not expose to humidity, dust, or to corrosive gases.
Card is not formatted.
Format card?
No
Yes
Write protect switch