Filter
Top Products
22
EN
Creating panoramic images
(A mode)
1
Set the shooting mode to A.
PANORAMAPANORAMA
0.00.0
AUTO
WB
AUTO
WB
AUTOAUTO
12
M
44
2
Press G to go to the submenu.
3
Use HI to select the desired mode
and then press the A button to set.
Submenu 1 Application
AUTO
Three frames are taken and
combined by the camera. The
user only composes the shots
so that the target marks and
pointers overlap, and the camera
automatically releases the shutter.
MANUAL
Three frames are taken and
combined by the camera. The
user composes the shots using
the guide frame and manually
releases the shutter.
PC
The frames that were taken are
combined into a panorama image
using the PC software (ib).
For details on installing the PC software (ib),
see “Camera setup” (p. 11).
When set to [AUTO] or [MANUAL], [IMAGE
SIZE] (p. 29) is fi xed to [2].
The focus, exposure (p. 26), zoom position
(p. 15), and white balance (p. 27) are locked
at the fi rst frame.
The fl ash (p. 25) is fi xed to $ (FLASH OFF)
mode.
Taking pictures with [AUTO]
1 Press the shutter button to take the fi rst
frame.
2 Move the camera slightly in the direction
of the second frame.
AUTOAUTO
MENU
OK
SAVECANCEL
Target mark
Pointer
Screen when combining images
from left to right
3 Move the camera slowly while keeping it
straight, and stop the camera where the
pointer and target mark overlap.
The camera releases the shutter
automatically.
AUTOAUTO
MENU
OK
SAVECANCEL
To combine only two pictures, press the
A button before taking a third frame.
4 Repeat Step 3 to take a third frame.
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without
saving an image, press the m button.
If the shutter does not automatically release,
try [MANUAL] or [PC].
●
●