Olympus 227670 Camcorder User Manual


 
52
EN
Error message
When one of the messages below is
displayed on the monitor, check the
corrective action.
Error message Corrective action
CARD ERROR
Card problem
Insert a new card.
WRITE
PROTECT
Card problem
The card write-protect switch is
set to the “LOCK” side. Release
the switch.
MEMORY FULL
Internal memory problem
Insert a card.
Erase unwanted images.
*1
CARD FULL
Card problem
Replace the card.
Erase unwanted images.
*1
CARD SETUP
OK
SET
FORMAT
POWER OFFPOWER OFF
Card problem
Use FG to select [FORMAT],
and press the A button. Next,
use FG to select [YES], and
press the A button.
*2
MEMORY SETUP
OK
MEMORY FORMAT
SET
POWER OFFPOWER OFF
Internal memory problem
Use
FG to select [MEMORY
FORMAT], and press the
A button. Next, use FG to
select [YES], and press the
A button.
*2
NO PICTURE
Internal memory/Card problem
Take pictures before viewing
them.
PICTURE
ERROR
Problem with selected image
Use photo retouch software,
etc. to view the image on a
computer. If the image still
cannot be viewed, the image le
is corrupted.
THE IMAGE
CANNOT
BE EDITED
Problem with selected image
Use photo retouch software, etc.
to edit the image on a computer.
BATTERY
EMPTY
Battery problem
Insert new batteries.
If using rechargeable batteries,
charge the batteries.
NO
CONNECTION
Connection problem
Connect the camera and
computer or printer correctly.
NO PAPER
Printer problem
Load paper into the printer.
Error message Corrective action
NO INK
Printer problem
Re ll the ink in the printer.
JAMMED
Printer problem
Remove the jammed paper.
SETTINGS
CHANGED
*3
Printer problem
Return to the status where the
printer can be used.
PRINT ERROR
Printer problem
Turn off the camera and printer,
check the printer for any
problems, and then turn the
power on again.
CANNOT PRINT
*4
Problem with selected image
Use a computer to print.
*1
Before erasing important images, download them to
a computer.
*2
All data will be erased.
*3
This is displayed, for instance, when the printer’s
paper tray has been removed. Do not operate
the printer while making the print settings on the
camera.
*4
This camera may be unable to print images taken by
other cameras.