Filter
Top Products
Button operations
EN
17
When a printer is connected to the camera, display the picture you want to print in playback
mode and press <.
g “EASY PRINT” (P. 38)
Press 3# in shooting mode to select the flash setting.
Press o to confirm your selection.
Press 2Y in shooting mode to select on and off for the self-timer.
Press o to confirm your selection.
• After pressing the shutter button completely, the self-timer lamp lights for approximately 10
seconds, blinks for approximately 2 seconds, and then the picture is taken.
• To cancel the self-timer, press 2Y.
• Self-timer shooting is automatically canceled after one shot.
Press
4&
in shooting mode to select the macro mode.
Press o to confirm your selection.
• Zoom and flash cannot be used in super macro mode/S-macro LED mode.
• [ISO] is fixed at [AUTO] when shooting in S-macro LED mode.
g “ISO Changing the ISO sensitivity” (P. 23)
< Printing pictures
3# button Flash shooting
AUTO (Auto-flash) The flash fires automatically in low light or backlight conditions.
! Red-eye reduction flash This emits pre-flashes to reduce the occurrence of red-eye in
your pictures.
# Fill-in flash The flash fires regardless of the available light.
$ Flash off The flash does not fire.
2Y button Self-timer shooting
Y OFF Cancel the self-timer.
Y ON Set the self-timer.
4& button Shooting pictures close to the subject (Macro mode)
OFF Macro mode is deactivated.
& Macro mode This mode lets you shoot as close as 20 cm/7.9 in. (wide) and
30 cm/11.8 in. (tele) from your subject.
% Super macro mode This mode lets you shoot as close as 7 cm/2.8 in. from your
subject. If the distance between the camera and the subject is
over 50 cm/19.7 in., the picture will be out of focus.
O S-macro LED mode The LED light illuminates from 7 cm/2.8 in. to 20 cm/7.9 in. from
the lens in super macro mode. Press the shutter button halfway
to turn on the LED light.
0
a
b