Filter
Top Products
27
í Erasing Pictures (One-Frame Erase)
Operating Procedure
1. Check that the camera is set to the
Playback mode by holding down the
monitor button for a moment.
2. Display the frame to erase by pressing
the or arrow pad key.
(The frame can also be selected even when the 4-split or
9-split display is selected.)
3. Press the OK/menu button.
¼ The monitor shows the playback mode menu 1/3.
4. Select by pressing the or arrow pad key.
5. Select “YES” by pressing the or arrow pad key.
6. Press the OK/menu button.
¼ The selected image is erased.
The orange lamp on the right of the viewfinder blinks
during erasure.
To cancel single-frame erasure:
Select “NO” and press the OK/menu button.
You can increase the number of images
remaining on a card by erasing
unnecessary images.
Arrow pad
OK/menu button
1/3
SET
OK
SELECT
NO
OFF
NO
NO
Monitor button
1/3
SET
OK
SELECT
NO
OFF
NO
NO
Playback mode menu 1/3 screen
1/3
SET
OK
SELECT
YES
OFF
NO
NO
Playback mode menu 1/3 screen