Filter
Top Products
22
En
1
Make sure that the card access lamp
is not illuminated.
2
Open the card cover.
3
Press the eject button gently and let it
pop out, then press it again all the
way in.The card will be ejected a short
way so that you can pull it out.
● If you press the eject button too hard, the
card may jump out of the camera.
● Pull out the card.
4
Close the card cover.
Inserting a card
Removing the card
Card access lamp
Eject button
01E-300BaEN-P1 04.10.21 9:49 PM Page 22