Filter
Top Products
102
EN
11
Using the OLYMPUS Master software
10After the download procedure the camera display will show “OK”. You can
remove the cables and turn power off. After restarting the camera you will be able
to choose the new language from [W].
Your camera supports the USB Mass Storage Class. You can transfer images to a computer
by connecting the camera to the computer with the provided USB cable. This can be done
even without using OLYMPUS Master. The following operating systems are compatible with
the USB connection:
Windows : 2000 Professional/XP Home Edition/XP Professional/Vista
Macintosh : Mac OS X v10.3 or later
x Notes
• If your computer is running Windows Vista, select [MTP] in Step 3 on page 98 to use
Windows Photo Gallery.
• Data transfer is not guaranteed in the following environments, even if your computer is
equipped with a USB port.
• Computers with a USB port added by means of an extension card, etc.
• Computers without a factory-installed OS and home-built computers
Transferring images to your computer without using
OLYMPUS Master
s0029_e_00_0_unified.book Page 102 Monday, March 2, 2009 5:26 PM