Filter
Top Products
81
EN
8
Playback functions
Protect images you do not want to erase. Protected images cannot be erased by the single-
frame or all-frame erase function.
Single-frame protect
Play back the image you want to protect and press the 0
button.
• 9 (protect mark) is displayed on the top right corner of the
screen.
To cancel the protection
Display the images that are protected and press the 0
button.
Protecting selected frames
This function lets you select multiple images and protect them all at the same time during
single-frame playback or index display.
1 Display the images you want to protect and press the i button.
• The selected images will be shown with red frames.
• To cancel your selection, press the i button again.
• During index display, press p to select the images you want to protect and press the i
button.
2 Press p to display the next images you want to protect and press the i button.
3 After you have selected the images to protect, press the 0 button.
Canceling all protections
This function lets you cancel the protection of several images at one time.
1 MENU[q][RESET PROTECT]
2 Use ac to select [YES], then press the i button.
x Notes
• Formatting the card erases all images even if they have been protected.
g“Formatting the card” (P. 113)
• Protected images cannot be rotated even when the F button is pressed.
Protecting images
i button
0 button
s0029_e_00_0_unified.book Page 81 Monday, March 2, 2009 5:26 PM