Filter
Top Products
60
Taking Pictures in the MANUAL Flash Mode
You can manually set the illumination for your pictures.
1
Press the flash's MODE button until "MANUAL" appears on the
flash's control panel.
2
Set the illumination from the GNO/ISO up/down buttons.
Setting is possible in 1/4 EV steps.
1
2
E
Setting Illuminating Angle Manually
The illuminating angle of the flash can be set manually.
WIDE:58° vertical, 70°horizontal (It covers field angle of 28 mm lens.)*
TELE:28° vertical, 34°horizontal (It covers field angle of 80mm lens.)*
* Converted into 35 mm film camera angle.
1
Press the flash's T/W button.
2
Check the selected illumination angle( "WIDE" or "TELE") is
displayed.
MEMO
• In wide-angle zooming, the edges of pictures can be darkened by setting the flash's
illuminating angle to "TELE" (telephoto).
1
2