Olympus 1020 Digital Camera User Manual


 
Menu operations
EN 27
You can take a sequence of pictures at one time by holding down the shutter button. The
camera will take pictures continuously until you release the shutter button.
When [ W ] is selected, the following setting restrictions apply.
This function allows you to zoom up to maximum 40x by combining the optical zoom and
image cropping. This function will not reduce the image quality since it does not convert the
data with fewer pixels into the data with larger pixels.
The available zoom factor varies depending on the [IMAGE QUALITY] setting.
[IMAGE SIZE] is limited to [H] and lower.
The digital zoom can be used to take close-up shots with stronger magnification when
combined with optical zoom. (Optical Zoom × Digital Zoom: maximum 35×)
This function cannot be set when [FINE ZOOM] is [ON].
DRIVE ....................................................... Using sequential (continuous) shooting
o
Shoots 1 frame at a time when the shutter button is pressed.
j
Focus and exposure are locked at the first frame. The sequential shooting
speed varies depending on the image quality setting.
W
Pictures can be taken at a faster speed than normal sequential shooting.
FINE ZOOM .......................Zooming in on your subject without reducing image quality
OFF
/
ON
DIGITAL ZOOM ......................................................... Zooming in on your subject
OFF
/
ON
s
ing sequential (continuous) shooting
m
ing in on your subject without reducing image
t
y
o
oming in on your subject
W
W
T
T
P
4
4
IN
10
M
10
M
W
W
T
T
P
4
4
IN
10
M
10
M
Zoom bar
White area: The optical zoom area
Yellow area: The digital zoom area
Optical zoom Digital zoom
Flash mode can be selected between either [#] or [$] (Stylus1020/µ1020).
Flash mode is fixed at [$] (Stylus1010/µ1010).
[ISO] is fixed at [AUTO].
[IMAGE SIZE] is limited to [I] and lower.
[FINE ZOOM], [DIGITAL ZOOM] and [R] are not available.
d4344_4356_e_0000.book Page 27 Monday, December 17, 2007 9:13 AM