Filter
Top Products
43
EN
For information on using the menus, see “Using the Menu” (p. 4).
Selecting the camera sound and its
Selecting the camera sound and its
volume [Sound Settings]
volume [Sound Settings]
r (Settings 1) X Sound Settings
Submenu 2 Submenu 3 Application
Sound Type
1/2/3
Choose the sound
made by camera
controls.
q Volume
OFF (No Sound)
or 5 levels of
volume
Adjusts the image
playback volume.
Volume
OFF (No Sound)
or 5 levels of
volume
Choose the volume
of the sound
made by camera
controls.
Adjusting the CCD and the image
Adjusting the CCD and the image
processing function [Pixel Mapping]
processing function [Pixel Mapping]
s (Settings 2) X Pixel Mapping
This function has already been adjusted at factory
shipping, and no adjustment is needed right
after purchase. Approximately once a year is
recommended.
For best results, wait at least one minute after taking
or viewing pictures before performing pixel mapping.
If the camera is turned off during pixel mapping, be
sure to perform it again.
To adjust the CCD and the image
To adjust the CCD and the image
processing function
processing function
Press the Q button when [Start] (Submenu 2) is
displayed.
The camera checks and adjusts the CCD and the
image processing function at the same time.
●
Adjusting the brightness of the monitor
Adjusting the brightness of the monitor
[
[
s
s
]
]
s (Settings 2) X s
Submenu 2 Application
Bright/Normal
Selects the monitor brightness
depending on the surrounding
brightness.