Omega Vehicle Security HHB400 Camcorder User Manual


 
2 How to view the screen
a Insert the Micro SD to memory card slot correctly.
b Press to enter view mode, the screen automatically find
the image signal. When the same receiving and transmission
frequency occurs, it is time to view image.The default chan-
nel is CH12414MHZ
c Press to take a photo (but if no card is inserted, the key
will not function), the files will be stored in memory card itself.
d Press to start record image (but if no card is inserted, the
key will not function), red icon will show on the up edge of the
screen, the files with be stored in memory card itself.
e Press to rotate image, every press rotates 180°.
f Press to zoom from 1 to 3.2 times with corresponding
numbers indicating zoom size.
g Press to enter menu set.
h Press to enter playback mode.
i Hold for 3s to turn off the product.
Note The screen turns off itself if not in use for 3 minutes.
Tips When the system is working (especially in video mode),
ejecting SD card will damage the stored files or damage
SD card, please make sure the system is off before removing
SD card.
3 How to set screen Menu
a In View status, press MENU
to set menu.
b Select the menu by pressing the four direction keys.
c Press MENU
to confirm the selection.
d Press EXIT back to the last menu until you are View mode.
e The following table shows screen setting menu.
9