Filter
Top Products
11
5. This product is designed for inspection of hard-to reach areas.
Typical applications include HVAC inspection, car inspection,
circuitry, vessel and aircraft.
OPERATION PRECAUTIONS!
1. Please read all the safety instructions carefully.
2. The probe is flexible to help you operate in hard-to-reach areas.
Please don’t insert or bend by force. Please do not over bend any
part of the probe. Normally, the bending radius should not be less
than 2" (50mm) to prevent from permanent damage to the probe.
3. Don’t use the probe or camera head to modify surroundings,
clear pathways or clogged areas.
4. The hand-held display unit is not waterproof. The camera head
and its cover are waterproof, but not acid-proof or fire-proof. Do
not touch these materials or they will ruin the camera head’s pro-
tective plastic. Avoid submersing the camera head into corrosive,
oily places or high temperature objects.
5. Don’t place the cameral head or probe into anything or anywhere
that may contain a live electrical charge.
Please check following methods to avoid injury.
For walls: For inspecting the inside of walls, be sure to shut off the
circuit breaker to the whole house before
using the tool.
For pipes: If you suspect a metal pipe could contain an electrical
charge, have a qualified electrician check the pipe before using this
product. A ground circuit, in some cases, can be returned to the
cast aluminum pipes and cause them to be charged.
For automobiles: Be sure the automobile is not running during
inspection. Metal and liquid under the hood may
be hot. Don’t get oil or gas on the camera head.
• Please do not operate this product unless the manual has been
read thoroughly and proper training has been completed.