Optimus COOLPIXS630BK Digital Camera User Manual


 
113
Shooting Options: The Shooting Menu
Shooting, Playback and Setup Menus
B Notes on Face Priority
When Face priority is selected for AF area mode, the setting will automatically switch to Auto if
no face is detected when the shutter-release button is pressed halfway.
If no face is recognized when the shutter-release button is pressed halfway in the Portrait or Night
portrait scene modes or smile mode, the camera will focus on the subject in the center of the
frame.
The camera may be unable to detect faces in the following situations:
- When faces are partially hidden by sunglasses or other obstructions
- When the subject is not looking directly at the camera
- When faces take up too much or too little of the frame
The camera’s ability to detect faces depends on a variety of factors, including whether or not the
subject is facing the camera.
In some rare cases shooting subjects with which autofocus may not perform as expected (A27),
the subject may not be in focus despite the fact that the double border glows green. Should this
occur, switch to auto mode and set AF area mode to Manual or Center, refocus on another
subject positioned at the same distance from the camera as the actual portrait subject, and use
focus lock (A111).
Images that were taken using face priority will be rotated and displayed automatically according
to the orientation of the faces detected, in full-frame and thumbnail playback modes.
I Autofocus Mode
Choose how the camera focuses.
Set to A / B M d (Shooting menu) M I Autofocus mode
A Single AF (default setting)
Camera focuses when the shutter-release button is pressed halfway.
B Full-time AF
Camera focuses continuously until the shutter-release button is pressed down
halfway. Use with moving subjects.