Filter
Top Products
16
z
Switch the camera on and then connect it to
your PC using the USB cable.
● Connecting the camera to your PC with the
USB cable allows you to do the following:
hCharge the camera battery (/P.17)
hDownload and display images (/P.22, 24)
hModify the camera settings, delete images, format the
camera memory and reset the counter (/P.26)
hTake care to connect the plugs on the
USB cable into the correct sockets, and
ensure that the plugs are inserted firmly.
hThe Auto Power Off function does not
operate when a USB connection is
being used.
CONNECTING THE CAMERA TO A PC
<Using the USB Cable>
Connecting the camera to your PC with the enclosed USB cable, you can charge the
battery and download your images to your PC.
Check that “Oregon Scientific Photo Album” software was installed correctly before connecting the camera to
your PC using the USB cable.
When you connect the camera to a PC, “6”
appears on the camera’s LCD to indicate that
the camera is communicating with the PC.
✽ The PC switches to standby mode until it recognizes
the camera.