Filter
Top Products
Note:
1. If the SD card is present in the camera, and then the picture/ video will save in the SD
card. If no card is installed, the camera uses internal memory.
2. If the “MEMORY FULL” warning message appears on the TFT panel, it means the SD
card or internal memory is full. Please remove the memory and insert a new one or
move/store all picture/video in memory to your computer.
• Turning On the Camera:
1. Press the ON/OFF button on as shown in the illustration.
2. Buzzer will beep and indicator lamp will light. The TFT panel will be
turned on.
3. Press the ON/OFF button again to shutdown the camera.
• Setting the Date, Time and Date Stamp:
1. Use the following procedure to change the date and time
setting.
2. Slide the Function switch to
(capture status).
3. Press the Mode button twice to turn on function menu. Press
the OK button.
4. Push the joystick up or down to adjust the date and time.
5. Push the joystick let or right to advance to the next setting.
6. When finished, press the OK button to confirm the setting; press the Menu button to
return to main menu, press the Mode button to exit the menu.
Use the Date Stamp setting to imprint the date on your pictures.
In the Date Time Setting menu. Make sure the camera clock is set to the correct date.
1. Slide the Function switch to (capture status).
2. Press the Menu button and then push the joystick up or down to select [Time Stamp]
option.
- 8 -