Filter
Top Products
12 (E)
Checking the system operations (cont.)
Turning on the power
3
Press the part marked “PUSH” and close the
cassette holder.
When the holder is closed properly, the
cassette holder is retracted automatically.
4
Close the cassette cover after the cassette
holder has been completely retracted.
O Do not take hold of the cassette cover alone
to insert or remove tapes.
Insert and remove cassette tapes after
putting the camera-recorder down on a
stable, flat surface or hold it with both hands
to keep it stable.
O Do not forcibly push the cassette holder into
place as this may cause malfunctioning.
O Wait until the cassette holder is completely
retracted before closing the cassette cover.
3
4
O
F
F
O
N
M
O
D
E
POWER
CAMERA
VCR
Hold down the white button and turn the
POWER lever to the ON position.
The CAMERA (red) lamp lights, and the
camera-recorder switches to shooting pause
mode.
POWER lever
Inserting the cassette tape
1
Slide the OPEN/EJECT lever in the direction
of the arrow, and open the cassette cover.
When the cover is fully opened, the cassette
holder pops out automatically.
2
Insert the cassette tape.
OPEN/EJECT
1
2
Cassette cover
Cassette holder