Filter
Top Products
73 (E)
MENUS
ENGLISH
The underlining indicates the factory setting.
Menu configuration (cont.)
SEARCH
(VCR)
Use this to set the operation to be
performed when an INDEX button (
9
or
:
) on the remote control unit is pressed.
PHOTO:
A photo search is conducted. (P52)
SCENE:
An index search is conducted. (P52)
32K (12bit)
AUDIO
(VCR)
Use this to set the sound to be output as
CH1 and CH2 signals when playing back a
tape that was recorded in the 32K (12-bit)
audio mode.
ST1:
This selects the sound that was recorded
during shooting.
CH1 signals = CH1 track
CH2 signals = CH2 track
ST2:
This selects the sound that was dubbed
on the recording.
CH1 signals = CH3 track
CH2 signals = CH4 track
MIX:
This mixes the sound that was recorded
during shooting and the sound that was
dubbed on the recording.
CH1 signals = CH1 + CH3 tracks
CH2 signals = CH2 + CH4 tracks
<Note>
When sound is recorded in the 48K (16-bit)
audio mode, CH3 and CH4 do not exist so
the following always stands:
CH1 signals = CH1 track
CH2 signals = CH2 track
AUDIO OUT
(VCR)
Use this to set the audio signals to be
output from the AV IN/OUT jack when the
tape is played back.
CH1•CH2:
CH1 output = CH1 signals
CH2 output = CH2 signals
CH1:
CH1 output = CH1 signals
CH2 output = CH1 signals
CH2:
CH1 output = CH2 signals
CH2 output = CH2 signals
32K (12bit) AUDIO item/AUDIO OUT item settings and audio track signals output from
the AV IN/OUT jack
Audio recording
mode
AUDIO OUT
item setting
AV IN/OUT jack
CH1 output
AV IN/OUT jack
CH2 output
32K (12bit) AUDIO
item setting
32K (12-bit)
48K (16-bit)
CH1•CH2
CH1
CH2
CH1
CH1
CH2
CH2
CH1
CH2
ST1
CH1•CH2
CH1
CH2
CH3
CH3
CH4
CH4
CH3
CH4
ST2
__
CH1+CH3 CH2+CH4MIX
CH1•CH2
CH1
CH2
CH1
CH1
CH2
CH2
CH1
CH2
__
PLAYBACK FUNCTION screen
Item/
(Display
mode)
Description of settings
Item/
(Display
mode)
Description of settings