Filter
Top Products
15
BB
BB
ee
ee
ff
ff
oo
oo
rr
rr
ee
ee
UU
UU
ss
ss
ee
ee
Using the Viewfinder/LCD Monitor
1
Pull out the Viewfinder and tilt it up.
OThe angular part of the Viewfinder can be turned
upward by 80° and downward by 38°.
ODo not pull on the Eyecup to extend the
Viewfinder.
2
Adjust by sliding the Eyepiece Corrector Knob
I.
12:30:45 AM
OCT 15 2002
12:30:45 AM
OCT 15 2002
12:30:45 AM
OCT 15 2002
12:30:45 AM
OCT 15 2002
I
$ Using the Viewfinder
Before using the Viewfinder, adjust the field of view so
that the displays inside the Viewfinder become clear
and easy to read.
1
Press the [PUSH OPEN] Button : and, at the
same time, bring the LCD Monitor ; out about
90° in the direction of the arrow.
OThe Viewfinder goes off.
:
;
2
Adjust the LCD Monitor angle according to the
desired recording angle.
OThe LCD Monitor can rotate a maximum of 180°
1 from the vertical position to the upward
direction and a maximum of 90° 2 to the
downward direction. Forcefully rotating the LCD
Monitor beyond these ranges will damage the
Camera Recorder.
OWhen you open the LCD Monitor, be sure that
the LCD Monitor and the Viewfinder cannot
touch.
Closing the LCD Monitor
Push the LCD Monitor until it is securely locked.
180°
1
90°
2
$ Using the LCD Monitor
With the LCD Monitor open, you can also record the
picture while watching it.
$ Adjusting Brightness and Color Level
When [LCD/EVF SET] on the [DISPLAY SETUP] Sub-
Menu is set to [YES], the following items are
displayed.
LCD Brightness [LCD BRIGHTNESS]
It adjusts the brightness of the image on the LCD
screen.
LCD Color Level [LCD COLOR LEVEL]
It adjusts the color saturation of the image on the
LCD screen.
Brightness of the Viewfinder [EVF BRIGHTNESS]
It adjusts the brightness of the image in the
Viewfinder.
To Adjust
Press the [PUSH] Dial and select the item to be
adjusted, and then turn the [PUSH] Dial to raise or
lower the number of vertical bars in the Bar Indication.
OA larger number of vertical bars indicates stronger
brightness or color saturation.
Increasing the Brightness of the Entire LCD
Monitor
Set the [LCD MODE] on the [DISPLAY SETUP] Sub-
Menu to [BRIGHT].
OThese adjustments do not affect the recorded
images.
OFor other notes concerning this item, see -49-.
LCD/EVF SET
PUSH MENU TO RETURN
LCD BRIGHTNESS
[-]||||----[+]
LCD COLOR LEVEL
[-]||||----[+]
EVF BRIGHTNESS
[-]||||----[+]