Filter
Top Products
105
CAM CARD R/W SELECT screen
Item
Variable
range
Remarks
VF
display
CAM CARD R/W SELECT screen
The settings for saving (recording) specific menu data
on the setup card and loading (reading) the data from
the card are performed on this screen.
Item
Variable
range
Remarks
ID READ/WRITE ON
OFF
VF
display
USER
ENG
For setting camera ID
saving/loading when
writing data onto the setup
card or loading data from
it to ON or OFF.
ON
: The camera ID is
recorded/loaded.
OFF
: The camera ID is not
recorded/loaded.
Example:
If the CAMERA ID
contents are not to be
changed when setup card
data is saved/loaded,
select OFF as the ID
READ/WRITE setting.
CAM MAIN
MENU1 LEVEL
R/W
ON
OFF
USER
ENG
For setting FILM (CAM)
MAIN MENU 1 (items
other than those marked
with }) data saving/loading
when writing data onto the
setup card or loading data
from it to ON or OFF.
ON
: The data is
recorded/loaded.
OFF
: The data is not
recorded/loaded.
<Note>
See page 87 for
information on the items
marked with }.
CAM MAIN
MENU1 SW (})
R/W
ON
OFF
USER
ENG
For setting FILM (CAM)
MAIN MENU 1 (items
marked with }) data
saving/loading when
writing data onto the setup
card or loading data from
it to ON or OFF.
ON
: The data is
recorded/loaded.
OFF
: The data is not
recorded/loaded.
CAM MAIN
MENU2 R/W
ON
OFF
USER
ENG
For setting FILM (CAM)
MAIN MENU 2 data
saving/loading when
writing data onto the setup
card or loading data from
it to ON or OFF.
ON
: The data is
recorded/loaded.
OFF
: The data is not
recorded/loaded.
CAM MAIN
MENU3 R/W
ON
OFF
USER
ENG
For setting FILM (CAM)
MAIN MENU 3 data
saving/loading when
writing data onto the setup
card or loading data from
it to ON or OFF.
ON
: The data is
recorded/loaded.
OFF
: The data is not
recorded/loaded.
CAM MAIN
MENU4 R/W
ON
OFF
USER
ENG
For setting FILM (CAM)
MAIN MENU 4 data
saving/loading when
writing data onto the setup
card or loading data from
it to ON or OFF.
ON
: The data is
recorded/loaded.
OFF
: The data is not
recorded/loaded.
The underlining in the variable range column indicates the setting in
the preset mode.
Setting menu screens FILM (CAM) MAIN MENU 3
CAM CARD READ/WRITE screen
The settings for saving (writing) the menu data on the
setup card, loading (reading) the data from the card,
and configuring the card are performed on this screen.
Item
Variable
range
Remarks
READ
==
VF
display
USER
ENG
For loading the data from
the setup card.
SELECT 1
:
8
USER
ENG
For selecting the number
of the file to be loaded.
WRITE
==
USER
ENG
For saving the camera’s
data on the setup card.
SELECT 1
:
8
USER
ENG
For selecting the number
of the file to be saved.
CARD CONFIG
==
USER
ENG
For formatting the setup
card.
TITLE READ
==
USER
ENG
For reading the titles given
to the data saved on the
setup card.
READ USER
DATA
==
USER
ENG
For loading the user area
data of the camera’s
memory.
TITLE 1:
to
TITLE 8:
==
USER
ENG
A title consisting of up to 8
characters can be given to
each file.
<Note>
When the frame frequency setting has been changed, it is
necessary to restart the unit by turning the POWER switch to OFF
and then to ON again for the setting to be switched.