Filter
Top Products
48
CH1 CH2
20
0
EMPHASIS
40
-dB
10
30
E
BATT
F
TAPE
RF
SERVO
HUMID SLACK
DF
SLAVE TCG HOLD
h min s frm
Screen displays
Displays relating to errors and
warnings
For details, refer to “Warning system” (pages 122 and
123).
Remaining tape display
The remaining tape time is displayed using 7 segments.
The remaining tape time indicated by each segment is set
to 3 minutes or 5 minutes using TAPE REMAIN/ $ on the
VTR MENU “BATTERY/TAPE” screen. Each time the
number of minutes set for the segments elapses, one
segment is cleared. (See page 114)
Remaining battery charge display
If a battery with a digital display (% display) is used, all 7
segments up to the “F” position light when the 70% or
more of the battery charge remains.
When there is less than 70% of the battery charge
remaining, the segments go out one by one in sequence
every time the remaining charge drops by 10%.
Audio channel level meter
CH1 CH2
20
0
EMPHASIS
40
-dB
10
30
E
BATT
F
TAPE
RF
SERVO
HUMID SLACK
DF
SLAVE TCG HOLD
h min s frm
Error code display
Warning displays
RF : Clogged video head
SERVO:Servo disturbance
HUMID :Formation of condensation on the head drum
SLACK: Problem in tape take-up
Displays relating to time codes
Time code-related switch settings and display
items
CH1 CH2
20
0
EMPHASIS
40
-dB
10
30
E
BATT
F
TAPE
RF
SERVO
HUMID SLACK
DF
SLAVE TCG HOLD
h min s frm
Time counter display
This displays the time code, CTL, user’s bit and actual
time. For the correlation between the items displayed and
the switches, refer to the next section.
These displays light for the time code, CTL and actual
time
DF : Drop frame mode
SLAVE :External locking of the time code
HOLD : Time code generator in the hold mode (when the
HOLD button has been pressed)
TCG switch
position
DISPLAY switch
position
Display item
SET
TC or CTL Time code
F-RUN or R-RUN
UB User’s bit
CTL CTL
TC Time code
UB User’s bit
<Note>
If the HOLD button is pressed while the DISPLAY
switch is set to UB, “HOLD” on the counter display will
flash for as long as the switch is held down, and the
VITC user’s bit information recorded in the video AUX
area will appear on the counter display.
Remaining battery charge and
audio channel level and
remaining tape displays