Filter
Top Products
- 41 (E) -
Setting of menu items
GEN-LOCK
GEN-LOCK INPUT :BNC
H PHASE-COARSE :+00
H PHASE-FINE :+000
SD HD PHASE CRS :+0
SD HD PHASE FINE :+00
SETTING menu
GEN-LOCK INPUT [BNC, DSUB]
For selecting whether the sync signals are to
be input from the BNC or D-SUB connector.
H PHASE-COARSE
[–40 to +40 (720 mode)]
[–60 to +60 (1080 mode)]
For roughly adjusting the horizontal phase.
H PHASE-FINE [–45 to +45]
For finely adjusting the horizontal phase.
SD HD PHASE CRS [–4 to +4]
For roughly adjusting the phase of the HD
video signals when SD sync signals have been
input.
SD HD PHASE FINE [–99 to +99]
For finely adjusting the phase of the HD video
signals when SD sync signals have been input.
PIX DEFECT
AUTO DETECTION :READY
CNT
R 1
G 5
B 2
Y 1
AUTO DETECTION
When ACTIVE is selected, automatic defect
compensation processing* is performed, and
when this processing is completed, the status
returns to READY.
* Execute automatic defect compensation
processing after supplying the power to the
camera at the normal temperature for at least
two hours.
[3] GEN-LOCK
[4] PIX DEFECT