Filter
Top Products
40
Specifications
Power supply: DC 12 V
(when external power is supplied)
A
C 150 V - 240 V
(when CCU is connected)
Power consumption:
28 W (during external power
supply operation, camera only)
34
W (when CCU is connected)
indicates safety information.
Ambient temperature range:
14 °F to 113 °F (–10 °C to +45 °C)
[Preheating required at temperatures
belo
w 32 °F (0 °C)]
Storage temperature range:
–4 °F to 140 °F (–
20 °C to +60 °C)
Operating ambient humidity:
Less than 85 %
W
eight: Approx. 10.36 lbs. (4.7 kg)
Dimensions: 5-5/16˝
10-1/4˝
14-3/16˝
(W H
D) (135 260 360 mm)
[excluding protrusions]
Basic items
1) Pic
kup device: 2/3˝ 2.2 million pixel IT-CCD 3
2
) System: GBR pickup system
3) Color separation optical system:
f/1.4 pr
ism
4) Optical filters: CC: 3200K, 4300K, 6300K, Cross,
Diffusion
ND:
CAP, Through, 1/4, 1/16, 1/64
5) Lens mount: Bayonet type
6) Output standard: SMPTE 292M
7) Sensitivity: f/10.0, 2000 lux, 3200K,
white reflectance 89.9 %
(Vertical frequency: 59.94 Hz)
8) Horizontal modulation:
More than 50 % (
27.5 MHz)
9) S/N ratio: 60 dB typ. (Y: 30 MHz)
10) Horizontal frequency:
33.716 kHz, 11
25-line frame
(Vertical frequency: 59.94 Hz)
2
8.125 kHz, 1125-line frame
(Vertical frequency: 50 Hz)
11) Vertical frequency:
59.94 Hz or 50 Hz, inter
lace
Input/output signals
1) MIC input:
–20, –30, –40, –50, –60 dBm
(XLR 3-pin f
emale
2)
Gain selected by camera menu
2
) INCOM: 0 dBm/600 ohms
(XLR, 5-pin f
emale
2)
(Mixing is controlled separately for
PGM1 and PGM
2.)
3) HD-SDI1/HD-SDI2 output:
HD signal = 0.8
Vp-p, 75 ohms (BNC)
The HD-SDI
2 signal output can be
added to the regular images using the
camera menu item setting and switched
to the VF or RET image output.
4)
Prompt output: VBS signal = 1 Vp-p, 75 ohms (BNC)
G/L input: Tri-level SYNC or black burst (BNC)
Selected using a switch.
5)
HD RET input: HD analog signal = 1 Vp-p, 75 ohms
(BNC)
Prompt
2 output: VBS signal = 1 Vp-p, 75 ohms (BNC)
Down converter output:
VBS or D1 signal = 1 Vp-p or 0.8 Vp-p,
75 ohms (BNC)
Input or output can be selected using
the camera menu item setting.
Control
1) P
ower selection: EXT, OFF, CCU
2) USER 1, 2, 3: Functions specified by menu items can
be allocated to the switch.
3) RET A/B selection:
F
or selecting the return signal
4) Monitor selection:
Y/C, NAM, R, G, B
5) RET, PTT SW: RET, PTT
6) Gain selection: LOW, MID, HIGH
7) Output selection: CAM, BAR, TEST
8) White balance mode:
A, B
, preset
9) Shutter speed selection:
1/100, 1/1
25, 1/250, 1/500, 1/1000,
1/2000
10) AWB, ABB settings
11) Menu selection
1
2) CALL SW
13) INCOM: MIC ON/OFF, receive or PGM level
14) MIC setting: MIC power, MIC gain, MIC1 selection
15) Optical filter setting:
REM, LOCAL selection and LOCAL
setting
16) Bac
k light SW: ON/OFF
* When the CCU is connected, the selection functions
for 6) to 10) are not effective.
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.