Filter
Top Products
11
2 Align the center mark on the lens with the groove at the
top center of the lens mount, and mount the lens.
3 Lower the lens clamp lever to clamp the lens in place.
4 Insert the cable into the cable clamp and connect it to
the LENS connector.
<Notes>
For details on handling the lens, refer to the instructions
that accompany the lens.
Depending on the lens mounted, it may be necessary to
perform the following lens and camera adjustments.
1. Flange back adjustment for the lens
2. Auto iris operation speed adjustment for the lens
3. White shading adjustment for the lens (performed using
the controls on the camera)
1 Raise the lens clamp lever, and remove the mount cap.
Mount cap
Lens clamp lever
Center mark
LENS connector
Mounting the lens