Filter
Top Products
-37-
Shutter Speed
OFF
1/100
1/250
1/500
1/1 000
1/2 000
1/4 000
1/10 000
Required luminance ratio
1
2
4
8
16
32
64
160
Synchro-scan
-
100.3 Hz
250.0 Hz
492.2 Hz
984.4 Hz
1.969 kHz
3.938 kHz
7.875 kHz
*
For luminance settings at each shutter speed and
synchro-scan shutter speed, refer to the table
below.
@3 CCD Read Out Mode Setting [V Resolution:
Normal/Fine]
Normal: Normal image. (CCD storage will be by
field storage.)
Fine: Vertical resolution increases. (Vertical resolu-
tion is raised without increasing residual images
by frame storage and Electronic shutter.)
Normal is recommended for general use be-
cause sensitivity will decrease at the Fine set-
ting.
@4 PC Control Access Speed Setting [Baud Rate:
1 200bps/2 400bps/4 800bps/9 600bps]
Select a communication speed in controlling the
camera from the computer.
@5 Negative/Positive Selection
[Nega/Posi: Posi/Nega]
Posi: Normal image
Nega: Image is shown reversed in darkness and
color.
@6 Aspect Ratio Selection [Aspect Ratio: 16:9/4:3]
@7 Fan ON/OFF [Fan: ON/OFF]
The cooling fan can be turned off if fan noise is dis-
turbing in a studio, for example.