Filter
Top Products
- 9 (E) -
Major operating controls and their functions
1Lens mount
2/3” Standard bayonet type (B4 mount) lens or a
microscope adapter can be mounted.
2Lens fixing ring knob
Rotate the lens fixing ring knob counterclockwise and
remove the lens mount cap. Mount the lens on the
camera and rotate the lens fixing ring knob clockwise in
order to fix the lens securely.
3Mounting hole
A screw hole (1/4” - 20 UNC) for mounting the camera on
a wall, ceiling with a mounting bracket or tripod.
4Cooling fan
• Do not cover the port or otherwise block ventilation
during operation. Internal heat buildup can cause a fire.
• The cooling fan has a service life of about 30000 hours.
(at a room temperature of 25°C) Replace the fan that
has come to the end of its service life. (If the fan is used
at a room temperature of 35°C and above, replace it
about 30% sooner.)
Whenever fan replacement is necessary, be sure to ask
the store where you purchased the set.
5Expansion slot
Remove the cover, and connect the expansion card box.
For details, refer to the manual for expansion card box.