Panasonic BB-HCM331A Digital Camera User Manual


 
Operating Instructions
28
Audio features such as camera microphone sensitivity and mute during pan/tilt
can be set up on the Audio page (see page 68).
If you are running other applications or opening multiple windows, the audio
may be interrupted or delayed.
When the image is refreshed during any operation such as preset registration
or a web browser refresh, the volume is reset to the default (midrange)
position. Audio that was muted is enabled.
The audio may be interrupted due to your PC's performance or network
environment. Reduce the max. bandwidth (see page
40 and page 44).
If the camera is accessed while the PC user visits other websites, the active
microphone may pick up audio from the PC's speakers. Be careful with it.
If you cannot listen to the audio or talk from your PC, see 2.5 Audio Problems
in the Troubleshooting section of the Installation/Troubleshooting.
If you use external microphone, excessive length or poor quality microphone
cable can cause a degradation in audio quality.
To talk to the camera from your PC, an external amplified speaker must be
connected to the camera. The speaker connects to the camera with a stereo
audio cable similar to that used by your PC. Though the connector is stereo,
the audio is not.
If you install the camera outdoors, external microphone or external speaker
must be outdoor compatible.
MIC
EXTSP
For Microphone
For Speaker
External Microphone
(Plug-in power +3.3 V)
GND
External Speaker
Not
Connected
Signal
GND
Signal
(Output impedance 560 line level)
3.5 mm mini plug
3.5 mm stereo mini plug
Cable diameter 2 0.3 mm or below