Panasonic BB-HNP11A Security Camera User Manual


 
Operating Instructions
55
2.7.2 Motion Detection Recording
Record images when the motion is detected on the screen. Set the motion
detection settings on the motion detection page (see page 35).
1. Select a camera preview on the camera list.
Selected camera is displayed in a blue frame (see page 66).
2. Click .
Selected camera is recorded.
To stop recording, click .
is displayed during motion detection recording (see page
66). (Left: Green, Center: Red, Right: Red)
You can select [Start Motion Detection Recording] or [Stop Recording] on
the record menu bar.
You can record multiple cameras simultaneously.
Notes
If you select multiple cameras, select cameras while pressing [Ctrl] on
the keyboard.
You can record images before or after the motion is detected. Motion
detection level is changed depending on resolution, image quality,
object situation and network environment. Confirm the level by
performing motion detection recording to assure the intended
operation is realized (see page 35).
To stop motion detection recording, always click button, or select
[Record] [Stop Motion Detection Recording]. If you close the
operation window, recording program does not stop. If icon is
displayed on the system tray, the recording program is always working
(see page 17).