Filter
Top Products
Operating Instructions
75
2.14 Error Message List
Message Cause and Remedy
Basic Setting
Enter "Camera Name". • The Camera Name space was blank.
Follow the instruction message.
Enter "Camera Address". • The Camera Address space was blank.
Follow the instruction message.
"Port" should be between 1 and
65535.
• A number not between 1 and 65535 was
entered in the Port blank.
Follow the instruction message.
"Camera Name" should be 250
characters or less.
• The Camera Name was more than 250
characters.
Follow the instruction message.
"Comment" should be 128
characters or less.
• The Comment was more than 128 characters.
Follow the instruction message.
Image Settings
Specify Recorded Frequency and
Sound Recording cannot be
selected simultaneously. Either set
Recorded Frequency to [Not
Specify] or set the recording
settings to [Image Only].
• Image settings are set to [Recorded
Frequency Specify], and [Audio and Image]
are selected simultaneously. Or if another tab
or OK is pressed in this state.
Follow the instruction message.
Recording Capacity
Enter "Recording Capacity". • The Recording Capacity space was blank.
Follow the instruction message.
"Recording Capacity" should be
between 100 and 500000.
• A number not between 100 and 50000 was
entered in the Recording Capacity blank.
Follow the instruction message.