Filter
Top Products
Advanced (Recording pictures)
41
VQT1C14
Optical Image
Stabilizer
This mode detects jitter and compensates
for it.
1 Press and hold the optical image
stabilizer button A until
[STABILIZER] appears.
2 Press 3 4 to select the
stabilizer function mode and then
press [MENU/SET].
∫ About the jitter/movement detection
demonstration screen
Press 1 on the screen shown in step
2 to
display the jitter/movement detection
demonstration screen. (You cannot take
pictures while the demonstration screen is
displayed.)
Press 1 to exit the demonstration screen.
A: Jitter detection demonstration
B: Movement detection demonstration
• The jitter/movement detection
demonstration screen is an
approximation.
• The camera also detects the movement of
the subject when automatically setting the
ISO sensitivity in intelligent ISO sensitivity
mode [ ] (P42) and [SPORTS] (P46),
[BABY1]/[BABY2] (P48) and [PET] (P49)
in simple mode only.
• The stabilizer function may not be
effective in the following cases.
– When there is a lot of jitter.
– When the zoom magnification is high.
– In digital zoom range.
– When taking pictures while following a
moving subject.
– When the shutter speed becomes
slower to take pictures indoors or in dark
places.
Be careful of camera jitter when you press
the shutter button.
• The setting is fixed to [MODE2] in simple
mode [ ] and [SELF PORTRAIT] (P46)
in scene mode and fixed to [OFF] in
[STARRY SKY] (P49) in scene mode.
• In motion picture mode [ ], [MODE2]
cannot be set.
[MODE1]
()
The stabilizer operates
continuously and can assist
during photo composition.
[MODE2]
()
The jitter is compensated for
when the shutter button is
pressed. There is a greater
stabilizing effect.
[OFF]
()
When the stabilizer is not
desired.
STABILIZER
OFF
MODE2
DEMO.SELECT
MODE1
SET
MENU
MENU
SET
EXIT
JITTER, SUBJ. MOVE DEMO.
CANNOT BE DISPLAYED
IN REC MODE
VQT1C14ENG.book 41 ページ ２００６年１２月４日 月曜日 午後１１時０分