Panasonic DMC-FX10 Digital Camera User Manual


 
Advanced (Playback)
68
VQT1C14
Playing Back Motion
Pictures
Press 2 1 to select a picture
with a motion picture icon [ ]/
[]/[]/[]/[ ]/
[ ] and then press 4 to play
back.
A: The motion picture recording time
After playback starts, the elapsed
playback time is displayed on the bottom
right of the screen.
For example, 1 hour 20 minutes and
30 seconds is displayed as [1h20m30s].
The cursor displayed during
playback is the same as
3/4/2/1.
Stopping motion picture playback
Press 4.
Fast forwarding/Fast rewinding
Press and hold 2/1 during motion picture
playback.
2: Fast rewind
1: Fast forward
The camera returns to normal motion
picture playback when 2/1 is released.
To pause
Press 3 during motion picture playback.
Press 3 again to cancel pause.
Frame-by-frame forwarding/
frame-by-frame rewinding
Press 2/1 while paused.
Sound can be heard through the speaker.
Refer to [VOLUME] (P20) for information
about how to adjust the volume in the
[SETUP] menu.
The file format that can be played back
with this camera is QuickTime Motion
JPEG.
Please note that the bundled software
includes QuickTime to play back motion
picture files created with the camera on
the PC. (P82)
Some QuickTime Motion JPEG files
recorded by a PC or other equipment may
not play back on the camera.
If you play back motion pictures that have
been recorded with other equipment, the
picture quality may deteriorate or the
pictures may not play back.
When using a high capacity card, it is
possible that fast rewinding may be slower
than usual.
You cannot use the following functions in
motion picture mode.
Playback zoom
(during motion picture playback/pause)
–[ROTATEDISP.]
–[ROTATE]
[DATE STAMP]
–[RESIZE]
–[TRIMMING]
PLAY MOTION
PICTURE
10:00 DEC. 1.2007
1/3
25s
VQT1C14ENG.book 68 ページ 2006年12月4日 月曜日 午後11時0分