Filter
Top Products
Connecting to other equipment
84
VQT1C14
• It may take time to print some pictures.
Use a battery with sufficient battery power
(P21) or the AC adaptor (DMW-AC5PP;
optional) when you connect to a printer.
• Turn the camera off before inserting or
removing the cable for the AC adaptor
(DMW-AC5PP; optional).
1 Turn on the camera and the
printer.
2 Set the mode dial to [ ].
3 Connect the camera to a printer
via the USB connection cable A
(supplied).
• Connect the USB connection cable with
the [ ] mark facing the [2] mark on
the [DIGITAL] socket.
• Hold the USB connection cable at
C
and
insert straight in or take straight out.
• If the mode dial is not set to [ ] when
the camera is connected to the PC,
disconnect the USB connection cable, set
the mode dial to [ ] and then connect
the USB connection cable again.
(Depending on the printer, it may be
necessary to turn it off and then on again.)
• Do not use any other USB connection
cables except the supplied one.
• If a card is not inserted when the camera
is connected to the PC, you can edit or
access the picture data on the built-in
memory. If a card is inserted, you can edit
or access the picture data on it.
• You cannot switch between the built-in
memory and the card while the camera is
connected to the printer. When you want
to switch between the built-in memory and
the card, disconnect the USB connection
cable, insert (or remove) the card and
then connect the USB connection cable to
the printer again.
• If you want to print the age in [BABY1]/
[BABY2] (P48) or [PET] (P49) in scene
mode or the number of days that have
been passed since the departure date in
[TRAVEL DATE] (P54), use the software
[LUMIX Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] in the
CD-ROM (supplied) and print from the
PC. For information about this, refer to the
separate operating instructions for PC
connection.
• To find out more about PictBridge
compliant printers, contact your local
dealer.
∫
Selecting a single picture and printing it
1 Press 2/1 to select the picture
and then press [MENU/SET].
• The message disappears in about
2 seconds.
2 Press 3 to select [PRINT START]
and then press [MENU/SET].
• Press [MENU/SET] to cancel printing.
3 Disconnect the USB connection
cable after printing.
PLEASE SELECT THE
PICTURE TO PRINT
MULTI PRINT
SELECT
PRINT
PictBridge
1/3
100
_
0001
MENU
MENU
SET
OFF
SINGLE PICTURE
NUM. OF PRINTS
1
OFF
PRINT WITH DATE
PAPER SIZE
PAGE LAYOUT
PRINT START
MENU
SET
SELECTCANCEL SET
MENU
VQT1C14ENG.book 84 ページ ２００６年１２月４日 月曜日 午後１１時０分