Filter
Top Products
Basic
28
VQT0Y69
∫ Other Settings in Simple mode
In simple mode, other settings are fixed as
follows. For more information about each
setting, refer to the page indicated.
• Focus range:
30 cm (0.98 feet) to ¶ (Tele)
5 cm (0.16 feet) to ¶ (Wide)
• [POWER SAVE] (P21):
[5MIN.]
• [ECONOMY] (P21):
[OFF]
• Self-timer (P43):
10 seconds
• Optical Image Stabilizer (P46):
[MODE2]
• Burst speed (P47):
[]
• [W.BALANCE] (P70):
[AUTO]
• [SENSITIVITY] (P72):
[ ] (DMC-FX07)/[AUTO] (DMC-FX3)
• [ASPECT RATIO]/[PICT.SIZE]/[QUALITY]
(P73, 74):
– [ ENLARGE]:
: (7M) (DMC-FX07)/
(6M) (DMC-FX3)/
–[ 4qk6q/10k15cm]:
: (2.5M EZ)/
–[ E-MAIL]:
: (0.3M EZ)/
• [AF MODE] (P76):
[]
• [AF ASSIST LAMP] (P77):
[ON]
• [SLOW SHUTTER] (P77):
[1/8–]
• You cannot use the following functions in
simple mode.
– High angle mode
– White balance fine adjustment
– Exposure compensation
– Auto bracket
– [AUDIO REC.]
– [D.ZOOM]
– [COL.EFFECT]
–[PICT.ADJ.]
– [GUIDE LINE]
• You cannot set the following items in
simple mode.
– [TRAVEL DATE]
–[WORLDTIME]
∫ The Backlight Compensation
Backlight refers to when light comes from
the back of a subject.
In this case, the subject, such as a person,
will become dark.
If you press 3, compensating backlight ON
indication A appears and the
backlight compensation function is
activated. This function compensates the
backlight by brightening the whole of the
picture.
• If you press 3 while [ ] is displayed,
[ ] disappears and the backlight
compensation function is canceled.
• We recommend using the flash when you
use the backlight compensation function.
(When using the flash, it is fixed to Forced
ON [ ].)
• The flash setting is fixed to AUTO/Red-eye
reduction [ ] when the backlight
compensation function is set to [OFF].
3
BACKLIGHT
3
BACKLIGHT
VQT0Y69ENG.book 28 ページ ２００６年６月３０日 金曜日 午前１１時７分