Filter
Top Products
Connecting to other equipment
95
VQT0Y69
• To print the age in [BABY1]/[BABY2]
(P56) in scene mode or the departure
date for [TRAVEL DATE] (P58), use the
software [LUMIX Simple Viewer] in the
CD-ROM (supplied) and print from the
PC. For information about this, refer to the
separate operating instructions for PC
connection.
• To find out more about PictBridge
compliant printers, contact your local
dealer.
∫ Single picture
1 Press 3 to select
[SINGLE PICTURE] and then
press [MENU/SET].
2 Press 2 1 to select the picture
and then press 4.
• The message disappears in about
2 seconds.
3 Press 3 to select [PRINT START]
and then press [MENU/SET].
• Press [MENU/SET] to cancel printing.
4 Disconnect the USB connection
cable after printing.
∫
Setting date printing, the
number of
prints, the paper size and the page
layout
Select and set each item in step
3.
• Items not supported by the printer are
displayed in gray and cannot be selected.
• When you want to print pictures in a paper
size or a layout which is not supported by
the camera, set [PAPER SIZE] or
[PAGE LAYOUT] to [ ] and then set the
paper size or the layout on the printer. (For
details, refer to the operating instructions
of the printer.)
• [PRINT WITH DATE]
• If the printer does not support date
printing, the date cannot be printed on the
picture.
SELECT SET
DPOF PICTURE
SINGLE PICTURE
PictBridge
MENU
/SET
MENU
PLEASE SELECT
THE PICTURE TO PRINT
PictBridge
1/3
100
_
0001
EXIT
SELECT
PRINT
MENU
Settings on the printer are
prioritized.
[OFF] Date is not printed.
[ON] Date is printed.
OFF
SINGLE PICTURE
NUM. OF PRINTS
1
PRINT WITH DATE
PAPER SIZE
PAGE LAYOUT
SELECTCANCEL SET
MENU
PRINT START
/SET
MENU
VQT0Y69ENG.book 95 ページ ２００６年６月３０日 金曜日 午前１１時７分