Panasonic DMC-FH8 Digital Camera User Manual


 
Basic
- 44 -
Refer to P32 for information about how to play back pictures.
When you play back pictures on a PC, they cannot be displayed in the rotated direction unless
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows
recording information etc. to be added. It was established by “JEITA (Japan Electronics and
Information Technology Industries Association)”.
It may not be possible to rotate pictures that have been recorded with other equipment.
The display is not rotated during Multi Playback.
Use a battery with sufficient battery power when formatting. Do not turn the camera off during
formatting.
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
If the card has been formatted on a PC or other equipment, format it on the camera again.
It may take longer to format the built-in memory than the card.
If the built-in memory or the card cannot be formatted, consult your nearest Service Center.
If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
M [Rotate Disp.]
This mode allows you to display pictures vertically if they were
recorded holding the camera vertically.
[]([On]):
Rotate pictures on a TV and the LCD
display so that they are displayed
vertically.
[] ([External Only]):
Rotate only the picture on a TV so
that it is displayed vertically.
[OFF]
[Version Disp.] It is possible to check which version of firmware is on the camera.
[Format]
The built-in memory or card is formatted. Formatting
irretrievably deletes all the data so check the data carefully
before formatting.
~ [Language]
Set the language displayed on the screen.
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: lumixconcierge@ca.panasonic.com
For USA and Puerto Rico assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at:
http://www.panasonic.com/contactinfo