Filter
Top Products
- 71 -
Recording
Applicable modes:
Pictures are taken continuously while the shutter button is pressed.
[Burst]
Settings Description of settings
[˜]
([Burst On])
Burst speed approx. 1.3 pictures/second
•You can take pictures until the capacity of the built-in memory or the card
is full.
•The burst speed becomes slower halfway. The exact timing of this
depends on the type of card and the Picture Size.
•The focus is fixed when the first picture is taken.
•The exposure and White Balance are adjusted each time you take a
picture.
•The Burst speed (pictures/second) may become slower depending on
the recording environment, such as in dark places, if the ISO sensitivity is
high etc.
[]
([Hi-Speed Burst])
Burst speed approx. 10 pictures/second
Number of recordable
pictures
max. 100 pictures
•This can be set only during Normal Picture Mode.
•The picture size is fixed to 3M (4:3), 2.5M (3:2), 2M (16:9) or 2.5M (1:1).
•The Burst speed changes according to the recording conditions.
•The number of Burst recording pictures are limited by the picture-taking
conditions and the type and/or status of the card used.
•The number of Burst recording pictures may increase when you use a
card with fast writing speed or card is formatted.
•The focus, zoom, exposure, White Balance, shutter speed and ISO
sensitivity are fixed to the settings for the first picture.
•The ISO sensitivity is automatically adjusted. However, the ISO
sensitivity is increased to make the shutter speed become high-speed.
•Depending on the operating conditions, it may take time to take the next
picture if you repeat taking a picture.
[]
([Flash Burst])
Number of recordable
pictures
max. 5 pictures
•Still pictures are taken continuously with flash.
•This can be set only during Normal Picture Mode.
•The picture size is fixed to 3M (4:3), 2.5M (3:2), 2M (16:9) or 2.5M (1:1).
•Settings for focus, zoom, exposure, shutter speed, ISO sensitivity, flash
output are fixed to the first picture.
•Number of recordable pictures will be fixed to 5 pictures when the
self-timer is used.
•The flash setting is fixed to [‰].
[OFF] —