Filter
Top Products
- 25 -
Preparation
•High angle mode is also canceled if you turn the camera off or [POWER SAVE] is activated.
•The brightness of the pictures displayed on the LCD monitor is increased so some subjects
may appear differently from actuality on the LCD monitor. However, this does not affect the
recorded pictures.
•The LCD monitor automatically returns to normal brightness after 30 seconds when recording
in Power LCD Mode. Press any button to make the LCD monitor bright again.
•If the screen is difficult to see because of bright light shining on it, use your hand or another
object to block the light.
•The number of recordable pictures decreases in Auto Power LCD mode, Power LCD mode and
High angle mode.
•[AUTO POWER LCD] and [HIGH ANGLE] cannot be selected in Playback Mode.
•[LCD MODE] cannot be used when the component cable is connected.
•The [PATTERN] setting is fixed to [ ] in the Intelligent Auto mode.
[MONITOR] Adjust the brightness of the LCD monitor in 7 steps.
[LCD MODE]
These menu settings make it easier to see the LCD monitor when
you are in bright places or when you are holding the camera high
above your head.
[OFF]
„ [AUTO POWER LCD]:
The brightness is adjusted automatically depending on how bright
it is around the camera.
… [POWER LCD]:
The LCD monitor becomes brighter and easier to see even when
taking pictures outdoors.
Å [HIGH ANGLE]:
The LCD monitor is easier to see when taking pictures with the
camera held high above your head.
[DISPLAY SIZE]
Change the display size of some icons and menu screens.
[STANDARD]/[LARGE]
[GUIDE LINE]
Set the pattern of the guidelines displayed when taking pictures.
You can also set whether or not to have the recording information
displayed when the guidelines are displayed. (P47)
[REC. INFO.]:
[OFF]/[ON]
[PATTERN]:
[]/[]
LCD