Panasonic DMC-FP8 Digital Camera User Manual


 
Advanced (Recording pictures)
- 66 -
This takes pictures of a baby with a healthy complexion. When you use the flash, the light
from it is weaker than usual.
It is possible to set different birthdays and names for [BABY1] and [BABY2]. You can
select to have these appear at the time of playback, or have them stamped on the
recorded image using [TEXT STAMP] (P115).
Birthday/Name setting
1 Press 3/4 to select [AGE] or [NAME] and then press 1.
2 Press 3/4 to select [SET] and then press [MENU/SET].
3 Enter the birthday or name.
When the birthday or name is set, [AGE] or [NAME] is automatically set to [ON].
If [ON] is selected when the birthday or name has not been registered, the setting screen
appears automatically.
4 Press [MENU/SET] to finish.
To cancel [AGE] and [NAME]
Select the [OFF] setting in step
2 of the “Birthday/Name setting” procedure.
Note
The age and name can be printed out using the “PHOTOfunSTUDIO” bundled software on the
CD-ROM (supplied).
If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age or
name will not be displayed. Before taking pictures, set [AGE] or [NAME] to [ON].
The focus range is 5 cm (0.17 feet) (Wide)/30 cm (0.99 feet) (Tele) to .
[INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO1600].
If the camera is turned on with [BABY1]/[BABY2] set, the age and name are displayed at the
lower left of the screen for about 5 seconds, along with the current date and time.
If the age is not properly displayed, check the clock and birthday settings.
The birthday setting and name setting can be reset with [RESET].
The initial setting for [AF MODE] is [š].
[BABY1]/[BABY2]
Birthday: 2/1: Select the items (year/month/day).
3/4: Setting.
[MENU/SET]: Exit.
Name: For details on how to enter characters, read the
[TITLE EDIT] section on P113.