Panasonic DMC-FT1 Digital Camera User Manual


 
VQT1Z66
112
Advanced (Playback)
You can add the audio after taking a picture.
Select [AUDIO DUB.] on the [PLAYBACK] mode menu. (P25)
Note
Audio dubbing may not work properly on pictures recorded by other equipment.
Audio dubbing does not work on motion pictures and protected pictures.
Sound from motion pictures (When [REC MODE] is set to [MOTION JPEG]) or pictures
with audio recorded by this camera cannot be played back by older models of
Panasonic digital camera (LUMIX) launched before July 2008.
All the information regarding the [FACE RECOG.] of the selected image will be cleared.
Select [FACE RECOG.] on the [PLAYBACK] mode menu. (P25)
Note
Cleared information regarding the [FACE RECOG.] cannot be restored.
Images Cleared of [FACE RECOG.] will not be categorized for [FACE RECOG.] for
[CATEGORY PLAY].
Clearing of [FACE RECOG.] cannot be done of the protected image.
B [AUDIO DUB.]
Press 2/1 to select the picture and then press
[MENU/SET] to start audio recording.
The message [OVERWRITE AUDIO DATA?] screen appears
when audio has already been recorded. Press 3 to select [YES]
and then press [MENU/SET] to start audio recording. (The
original audio is overwritten.)
Audio is recorded from the built-in microphone on the camera.
If you press [], the audio dubbing is cancelled.
Press [MENU/SET] to stop recording.
It will automatically stop after recording about 10 seconds without
pressing [MENU/SET].
Press [] to return to the menu screen.
Press [MENU/SET] to close the menu.
[FACE RECOG.]
Press 2/1 to select the picture and then press [MENU/SET].
Press 3 to select [YES] and then press [MENU/SET].
Press [] to return to the menu screen.
Press [MENU/SET] to close the menu.
DMC-FT1&TS1GN-VQT1Z66_eng.book 112 ページ 2009年2月3日 火曜日 午後4時10分