Filter
Top Products
VQT1Z66
60
Advanced (Recording pictures)
Select this to take pictures of yourself.
∫ Technique for Self portrait mode
•
Press the shutter button halfway to focus. The self-timer indicator
lights up when you are brought into focus. Making sure you hold
the camera still, press the shutter button fully to take the picture.
• The subject is not focused when the self-timer indicator is
blinking. Make sure to press the shutter button halfway again to
focus.
• The recorded picture automatically appears on the LCD monitor
for reviewing.
• If the picture is blurry due to the slow shutter speed, we
recommend using the 2 second self-timer.
Note
•
The focus range is about 30 cm to 1.2 m.
• You can take a picture of yourself with audio (P93). If you do this, the self-timer indicator will
light up while recording the audio.
• The zoom magnification is automatically moved to Wide (1k).
• The self-timer can only be set to off or 2 seconds. If it is set to 2 seconds, this setting will
remain until the camera is turned off, the scene mode is changed or [REC] mode or
[PLAYBACK] mode is selected.
• The stabilizer function mode is fixed to [MODE2]. (P92)
• The initial setting for [AF MODE] is [š].
This allows you to take pictures of a wide landscape.
Note
•
The flash setting is fixed to [Œ].
• The focus range is 5 m to ¶.
You can take pictures with connections suitable for creating panorama images.
∫ Setting the recording direction
1 Press 3/4 to select the recording direction and then press
[MENU/SET].
•
The horizontal/vertical guideline will be displayed.
2 Take the picture.
•
You can retake the picture by selecting [RETAKE].
3 Press 3 [NEXT] to select and press [MENU/SET].
•
You can also press the shutter button halfway to set the menu.
• Part of the recorded image is displayed as a transparent image.
0 [SELF PORTRAIT]
, [SCENERY]
[PANORAMA ASSIST]
DMC-FT1&TS1GN-VQT1Z66_eng.book 60 ページ ２００９年２月３日 火曜日 午後４時１０分