Panasonic DMC-FT1 Digital Camera User Manual


 
VQT1Z66
70
Advanced (Recording pictures)
Note
The screen will change as following when the motion picture button is pressed in steps
2
and
3
.
¢1 The screen that is displayed during motion picture mode setting is different depending on the
setting of the
[REC MODE].
It is possible to set from following [MOTION PICTURE] mode menu.
[REC MODE] (P72)/[REC QUALITY] (P72)/[WHITE BALANCE] (P85)/[I.EXPOSURE] (P89)/
[AF MODE]
¢2
(P87)/[CONTINUOUS AF] (P74)/[DIGITAL ZOOM] (P91)/[COLOR MODE]
¢2
(P91)/[WIND CUT] (P75)/[LED LIGHT] (P75)
¢2 The setting which can be selected are different from still picture [REC] mode menu.
Start recording by pressing the motion
picture button.
The available recording time A is displayed on the top
right and the elapsed recording time B is displayed on
the bottom right of the screen.
Release the motion picture button right after you press
it. Audio will not be recorded for few second after it
starts recording if it is kept pressed.
The audio is also recorded simultaneously from the
built-in microphone on this unit. (Motion pictures
cannot be recorded without audio.)
The screen will become dark momentarily, and
recording will start after adjusting the display.
Stop the recording by pressing the motion picture button again.
If the built-in memory or the card becomes full in the middle of recording, the camera
stops recording automatically.
A Still picture recording
screen
B Motion picture mode
setting
¢1
C Motion picture
recording screen
D Still picture mode
setting
B
A
66
33
2424
24
VQT1Z66~Body2_mst.fm 70 ページ 2009年2月3日 火曜日 午後6時16分