Panasonic DMC-FX10 Camcorder User Manual


 
Charging the Battery
with the Charger
The battery is not charged when the
camera is shipped. Charge the battery
before use.
| Attach the battery with attention
to the direction of the battery.
2 Connect the charger to the
electrical outlet.
Preparation
3 Detach the battery after charging
is completed.
After charging is completed, be sure to
disconnect the charger from the electrical
outlet.
The battery becomes warm after using it
and during and after charging. The
camera also becomes warm during use.
This is not a malfunction.
The battery will be exhausted if left for a
long period of time after being charged.
Recharge the battery when it is exhausted.
The battery can be charged even if it is
not fully discharged.
Use the dedicated charger and battery.
Charge the battery with the charger
indoors.
Do not disassemble or modify the
charger.
Charging starts when the [CHARGE]
indicator (_,)lights green.
Charging is complete when the
[CHARGE] indicator _'_,)turns off (after
about 130 minutes).
*When the [CHARGE] indicator flashes,
read P12.
11
VQT1C 14