Panasonic DMC-FX10 Camcorder User Manual


 
Advanced (Recording pictures)
Shutter speed for each flash setting
_. , Shutter speed
Hash setting i _u_;j's-L.
: AUTO
_: AUTO/
Red-eye
reduction
Elm: Forced ON
_: Forced ON/
Red-eye
reduction
_: Slow sync./
Red-eye
reduction
: Forced OFF
1/30 to 1/2000
1/4 or
1 to 1/2000 1
1/4 to 1/2000 2
1/4 to 1/2000
1/8 or
1 to 1/2000 `3
1/4 or
1 to 1/2000 `4
+1 [NIGHT PORTRAIT (P46) and
[CANDLE LIGHT] (P48) in scene mode
+2 [PARTY] (P47)
+3 Simple mode [V]
+4 Intelligent ISO sensitivity mode [l_]
(P42), [SPORTS] (P46),
[NIGHT PORTRAIT] (P46),
[CANDLE LIGHT] (P48), [BABY1]/
[BABY2] (P48) and [PET] (P49) in
scene mode
+1, 3, +4: The shutter speed becomes
a maximum of 1 second in the following
cases.
-When the optical image stabilizer is set
to [OFF].
-When the camera has determined that
there is little jitter in simple mode [V]
and when the optical image stabilizer is
set to [MODE1] or [MODE2].
There will be differences in the above
shutter speeds in the following scene
modes.
-[NIGHT SCENERY] (P47): 8 seconds to
1/2000th of a second
-[STARRY SKY] (P49): 15 seconds,
30 seconds, 60 seconds
-[FIREWORKS] (P50): 1/4th of a second,
2 seconds
Do not look directly at the flash at
close range when it is activated.
If you bring the flash too close to an
object, the object may be distorted or
discolored by the heat or lighting from
the flash.
Do not cover the photo flash with your
fingers or other objects.
In economy mode, the LCD monitor
turns off and the status indicator lights
while the flash is charging. [This does
not happen when using the AC adaptor
(DMW-AC5PP; optional).] If the
remaining battery power is low, the
length of time that the LCD monitor
turns off to charge may become longer.
If you press the shutter button halfway
when the flash is activated, the flash icon
turns red.
When you take a picture beyond the
available flash range, the exposure may
not be adjusted properly and the picture
may become bright or dark.
When the flash is being charged, the flash
icon blinks red, and you cannot take a
picture even when you press the shutter
button fully.
The white balance may not be properly
adjusted if the flash level is insufficient for
the subject. (P59)
When the shutter speed is fast, the flash
effect may not be sufficient.
It may take time to charge the flash if you
repeat taking a picture. Take a picture
after the access indication disappears.
The red-eye reduction effect differs
between people. Also, if the subject was
far away from the camera or was not
looking at the first flash, the effect may not
be evident.
When the flash is activated, you can only
take 1 picture.
38
VQT1C14