Filter
Top Products
Inserting and
Removing the Battery/
the Card (optional)
• Check that this unit is turned off.
• Prepare a card. (optional)
• You can record or play back pictures
on the built=in memory when you are
not using a card. (P14)
] Slide the release lever in the
direction of the arrow and open
the card/battery door.
•Always use genuine Panasonic
batteries (CGA=S005A).
• Ifyou use other batteries, we cannot
guarantee the quality of this product.
2 Battery:
Insert it fully being careful about
the direction you insert it.
Pull the lever _ in the direction of
the arrow to remove the battery.
Card:
Push it fully until it clicks being
careful about the direction you
insert it.
To remove the card, push the card
until it clicks, then pull the card
out upright.
Preparation
(B): Do not touch the connection
terminals of the card.
• The card may be damaged if it is not
fully inserted.
30 Close the card/battery door.
Slide the release lever in the
direction of the arrow.
O
• If the card/battery door cannot be
completely closed, remove the card,
check its direction and then insert it
again.
• Remove the battery after use. Store the
removed battery in the battery carrying
case (supplied).
• Do not remove the card or the battery
while the card is being accessed. The
data may be damaged. (P21)
• Do not remove the battery until the
LCD monitor and the status indicator
(green) turn off as the settings on the
camera may not be stored properly.
• The supplied battery is designed only
for the camera. Do not use it with any
other equipment.
• Do not insert or remove the battery or
the card while this unit is turned on.
The data on the built-in memory or the
card may be damaged. Be particularly
careful while the built-in memory or the
card is being accessed. (P21)
• We recommend using a Panasonic
card.
13
VQT1C 14