Filter
Top Products
Others
104
Others
Using the MC Protector/ND Filter
The MC protector (DMW-LMC72; optional)
is a transparent filter which affects neither
the colors nor the amount of light, so it can
always be used to protect the camera’s
lens.
The ND filter (DMW-LND72; optional)
reduces the amount of light to
approximately 1/8th (equal to adjusting the
aperture value 3 increments) without
affecting the color balance.
1 Remove the lens cap and the lens
ring.
2 Attach the lens hood adaptor.
(P20)
3 Attach the MC protector A or the
ND filter B.
• Cap C (supplied with MC protector)
• The lens cap supplied with the camera
cannot be attached to the MC protector or
the ND filter.
• You cannot attach the MC protector and
the ND filter at the same time.
• When taking pictures with the flash using
the MC protector or ND filter, vignetting
effect may occur.
• If the MC protector/ND filter are dropped,
they may be destroyed. Be careful not to
drop them when attaching them to the
camera.
• The cap supplied with MC protector can
also be used for the ND filter.
• MCu“Multi-coated”
NDu“Neutral Density”
FZ20-PP.book 104 ページ ２００４年７月６日 火曜日 午後２時６分