Filter
Top Products
Preparation
15
VQT0R81
Inserting/Removing the Card
• Check that the camera is turned off.
• Close the flash.
1 Slide the card door to open it.
• The card and the data may be
damaged if it is inserted or removed
while the camera is on.
• We recommend using Panasonic’s
SD Memory Card. (Use only the
genuine SD card with SD Logo.)
2 Insert:
Insert the card fully until it clicks
and it is locked with the label
facing the front of the camera.
Remove:
Push the card until it clicks, then
pull the card out upright.
• Check the direction of the card.
• Do not touch the connection terminals
on the back side of the card.
• The card may be damaged if it is not
fully inserted.
3 1 Close the card door.
2 Slide the card door to the end
to close it firmly.
• If the card door cannot be completely
closed, remove the card and insert it
again.