Panasonic DMC-FZ30PP Digital Camera User Manual


 
Recording Menu Settings
96
VQT0R81
4 Set to Tele or Wide.
A: Zoom ring
Always set to Tele when using a tele
conversion lens and to Wide when
using a wide conversion lens.
The conversion icon ([ ] or [ ])
changes from red (blinking) to white.
When using a conversion lens, ensure
the conversion icon is white when
taking pictures. If pictures are taken
when it is blinking, performance will not
be up to specification.
Recordable range when using the
conversion lens
¢The actual magnification when using
digital zoom (P34) and extended optical
zoom (P34) is 1.7k that of the Tele
display.
Focus range is from 14 cm (0.46 feet) to
(wide conversion lens) and from 5.5 m
(18.0 feet) to (tele conversion lens).
Digital zoom cannot be used when using a
wide conversion lens.
When there is dirt (water, oil, and
fingerprints, etc.) on the surface of the
lens, the image may be affected. Lightly
wipe the surface of the lens with a soft,
dry cloth before and after taking pictures.
Ensure that [CONVERSION] is set to
[OFF] when not using a conversion lens.
When using the conversion lens:
–The built-in flash cannot be activated.
–If you set [CONVERSION] to [OFF], the
performance of the conversion lens will
not be optimal.
When using the tele conversion lens:
–We recommend using a tripod.
–The stabilizer function may not work
sufficiently.
–The focus indication may light due to the
jitter even if the subject is not focused.
The time required for focusing may
become longer than usual.
If you use an extra flash when a
conversion lens is attached, we
recommend setting the extra flash to
manual mode. Refer to the operating
instructions of the extra flash for details.
If you set [CONVERSION] to [ ] or [ ],
you cannot use the AF assist lamp. (P90)
Read the operating instructions of the
conversion lens for details.
Tele conversion lens
Indication 12
k
Actual magnification 20.4k
¢
35 mm film camera equivalent 714 mm
Wide conversion lens
Indication 1
k
Actual magnification 0.7k
35 mm film camera equivalent 24.5 mm
T(420) W(35)
5
1X
420
300
35
(3
50