Filter
Top Products
VQT3N40 (ENG)
18
Charging the Battery
∫ About batteries that you can use with this unit
The battery that can be used with this unit is DMW-BLD10PP.
•
Use the dedicated charger and battery.
• The battery is not charged when the camera is shipped. Charge the battery before use.
• Charge the battery with the charger indoors.
∫ About the [CHARGE] indicator
On: It will light up while charging.
Off: It will turn off when it completes the charging normally.
• When the [CHARGE] indicator flashes
–The battery temperature is too high or too low. It is recommended to charge the battery again
in an ambient temperature of between 10 oC to 30 oC (50 oF to 86 oF).
–The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.
It has been found that counterfeit battery packs which look very similar to the
genuine product are made available to purchase in some markets. Some of these
battery packs are not adequately protected with internal protection to meet the
requirements of appropriate safety standards. There is a possibility that these
battery packs may lead to fire or explosion. Please be advised that we are not
liable for any accident or failure occurring as a result of use of a counterfeit
battery pack. To ensure that safe products are used we would recommend that a
genuine Panasonic battery pack is used.
Charging
Attach the battery paying
attention to the direction of
the battery.
Connect the charger to the
electrical outlet.
• Disconnect the charger from the
electrical socket and detach the
battery after charging is completed.
[CHARGE]
DMC-G3K&G3W&G3PP-VQT3N40_eng.book 18 ページ ２０１１年４月２９日 金曜日 午後１２時１３分